Ensure that the serial connection/cable between the PDA and device is correct.
NOTE: The transfer is ALWAYS initiated from SP.
Ensure that the Data Xfer speed on the NMEA/Port Settings screen in SP matches the serial speed in the logger. There is no auto-negotiation of transfer speeds.
Try to get the list of the flight logs. This is done through the Transfer Screen.
NOTE: When the Palm initiates the serial communication, the logger should beep 3 times.
If the flight logs are displayed correctly, you should be able to then transfer the selected flight log from the device.
The following devices need to use “Filser” as the computer type to download valid IGC files.
Filser LX20 first batch
Filser LX20 with RSA security
Filser LX20-2000
Filser LX21
Filser DX50
Filser LX5000IGC
The following devices need to use “LX” as the computer type to download valid IGC files.